O00004114(RH HELICAL TEST 13 TEETH)
(CUSTOM MACHINING SERVICES)
#606=103.797				(CENTER DIST.)
#125=15.					(FEEDRATE)
G18G40G94G97				(X-Z PLANE, COMP. CANCEL, FEED/MIN., DIRECT RPM)
G91G28X0					(X-AXIS HOME)
G91G28Y0Z0					(Y & Z-AXIS HOME)
T17M6
G91G28X0					(X-AXIS HOME)
G91G28Y0Z0					(Y & Z-AXIS HOME)
M202						(TURNING MODE SELECTION)
M200						(MILLING MODE SELECTION)
G91G28C0					(C-AXIS HOME)
M19						(MILL SPINDLE ORIENT)
M4S0						(MILL SPINDLE CCW @ 0 RPM)
G90M108					(ABS MODE, B-AXIS UNCLAMP)
G0G90G53B[90+3.8]				(POSITION B-AXIS 90(+HOB LEAD ANGLE OF 3.8))
#3003=1					(SINGLE-BLOCK SUPPRESSION)
#3004=1					(FEED HOLD SUPPRESSION)
G0Y[#606+5.]				(Y-AXIS POSITION, 5.0MM CLEARENCE)
G90G54G43P1X0.Z5.				(X,Z-AXIS POSITION FOR HOBBING)
G90 G0 Y[#606-5.] 			(FIRST ROUGH CUT OF 5.0MM D.O.C. PER SIDE)
G114.3H1D1E1L13P[-52.5]Q5000R0.	(HOB CUTTING MODE ACTIVE,
						H1= MILL SPINDLE AS HOB SPINDLE,
						D1= HEAD 1 C-AXIS SAME DIRECTION AS MILL SPINDLE,
						E= # OF STARTS ON HOB,
						L= # OF TEETH,
						P= HELIX ANGLE,
						Q=MODULE/DP,
						R=ANGLE OF PHASE)
S300M8					(MILL SPINDLE 300RPM)
G1Z-102.F#125				(FEED ALONG Z-AXIS)
G1Y[#606+5.0]				(Y-AXIS RETACT)
G0Z5.						(RAPID TO FACE OF PART)
G113						(HOB CUTTING MODE CANCEL)
G0X500.
G91G28X0					(Y-AXIS HOME)
G91G28Y0					(X-AXIS HOME)
M05						(MILL SPINDLE STOP)
M09						(COOLANT CANCEL)
G91G28B0					(B-AXIS 0)
#3003=0					(SINGLE-BLOCK SUPPRESSION CANCEL)
#3004=0					(FEED HOLD SUPPRESSION CANCEL)
M30